Page 93
CHECKING YOUR TABLET CONNECTION
Select the C
ONNECTION
tab to check the status of your tablet connection to the serial port.
When checked, the tablet driver is on.
Displays all serial ports. The port in
use by the tablet is selected. Ports
used by other devices are dimmed.
Allows the use of two tools simultaneously.
(Not supported on the 4x5 tablet.)
Single tool mode at maximum data rate.
Required by some handwriting recognition
software.
Displays messages about your selected serial port.
•
C
ONNECTED
. The tablet is connected and responding correctly.
•
N
OT
R
ESPONDING
. There is no communication between the tablet
and the computer.
•
O
VERRIDDEN
. Another application has taken over control of the
serial port.
•
D
RIVER
O
FF
. The Intuos driver is turned off.