The above screenshot is for descriptive purposes; it may not match your screen.
Use a portion of your device's active area
of your device. This might be useful if you want a smaller pen stroke to
correlate to a larger movement on your computer's display, for example.
Note:
These instructions are recommended for advanced Wacom device users.
1.
.
.
3. Select
Mapping
and then click
Advanced
.
4. Turn the
Show advanced options
toggle "On" and make sure
Pen mode
is selected.
5. Close
Advanced
settings.
6. In Mapping settings, choose "Use custom area..." under
Tablet area
.
7. On the
Use a portion of your tablet's active area
screen, use any of the following methods to change your
device mapping settings:
Use the drag handles to drag the corners of the blue border to define the screen area that you want to
map to.
Select
Click to define
and use your cursor to select the screen area that you want to map to.
Enter the
Top, Bottom, Left,
and
Right
coordinates in pixels.
The above screenshot is for descriptive purposes; it may not match your screen.
User's Manual
72
72
