The Force proportions setting affects how drawing on your Wacom device appears on your display screen. It can
also affect the
. Force proportions is "Off" by default.
If the drawing area on your Wacom device has a different format than your display screen, it may make your
drawings look distorted and different than what you are drawing with your pen (Figure 1).
Figure 1
. This will then use a proportional area of your Wacom device,
making what you draw with your pen look the same on your display.
However, depending on your display screen layout, this may leave a portion of your Wacom device inactive, as
illustrated in the image on the left in Figure 2.
Figure 2
1.
.
2. Select your device from the
.
3. Select
Mapping
.
4. In Mapping settings, turn
Force proportions
to "On".
Tip
: You can turn
Force Proportions
on and off and watch the blue borders of the image in
Mapping settings to see how it affects the mapping on your device.
| Do not share my information |
User's Manual
74
74
