Page 43
The pen tip does not work
properly. Pressing the pen tip
to the tablet either does
nothing or brings up a shortcut
menu.
If the mouse is configured for left-handed operation, the tip and side
switch functions on the pen will be reversed. Open the Mouse control
panel and set the mouse for right-handed operation.
The tablet does not respond to
the pen.
On the PenPartner control panel, verify that Driver ON is checked. If
not, use your mouse to turn it back on. If you do not have a mouse
attached to your computer, use the Tab key to select the checkbox
and then press the spacebar to toggle the driver on.
Pen selects everything, will not
stop drawing.
If this occurs in Windows, try moving the Tip Feel slider toward Firm
in the PenPartner control panel.
Run the WTEST program to test the pen. Refer to
Delete the WACOM.INI and WINTAB.INI files located in the Windows
subdirectory, then restart Windows. Note that this will reset the
WACOM tablet to its factory default settings.
The tip or side switch does not
function.
Run the WTEST program and check for proper pen function. Make
sure the power light changes from orange to green when the tip or
side switch is pressed. If it does not, you may have defective
hardware; see
