22
22
CHANGING APPLICATION-SPECIFIC SETTINGS
To change pen settings for a specific application, select P
EN
and the application and then customize the tab
settings.
REMOVING APPLICATION-SPECIFIC SETTINGS
To remove an application-specific setting:
1.
In the T
OOL
list, select the P
EN
. Then, in the A
PPLICATION
list select the application you want to remove
from the list.
2. Click on the A
PPLICATION
list’s [ – ] button. In the dialog box that appears, click D
ELETE
to confirm your
selection. The selected application is removed from the list, along with any custom pen settings that you
may have created for it.
Hint:
To quickly remove all application-specific settings from the pen, remove the P
EN
from the T
OOL
list.
Then place the pen back on the pen display. The P
EN
will be added back to the T
OOL
list using the default
settings.
INSTALLING MULTIPLE TABLETS
The T
ABLET
list displays an icon for any supported tablet that has been detected on your system, and allows
you to select the tablet for which your changes will apply.
To add a new tablet,
connect it to your computer.
•
For USB tablets, the system searches the USB ports. When the new tablet is found, it is automatically
initialized.
•
If multiple tablets are installed, the tablet used to open the Wacom Tablet control panel is selected as the
default tablet.
To remove one of multiple tablets from the driver,
in the Wacom Tablet control panel select the tablet to
be deleted and click on the [ – ] button next to the T
ABLET
list. Note that you will need to restart your
computer before you can re-add the tablet to the driver.
Select a tablet icon for which to
customize pen and application
settings.
