WACOM Co., Ltd.
2
1.
Scope
This instruction manual applies to the LCD Signature tablet STU-500B.
2.
Summary
The Wacom® STU-500B LCD signature tablet combines the benefi ts of a liquid crystaldisplay (LCD) with
the control, comfort, and productivity of Wacom’s cordless, batteryfree pen technology. This gives you a
direct pen-on-screen interface that leads to a truer pen-on-paper writing experience.
The basic components of the LCD signature tablet include a Wacom pen tablet internally mounted behind a
5" diagonal TFT monochrome LCD display, and a Wacom pen.
The LCD signature tablet is equipped with a USB and RS-232C interfaces.
3. Precautions on use and handling
Be sure to follow all instructions, cautions, and warnings found within this guide.
Failure to do so could cause the loss of data or damage to your computer. Failure to do so could also void
your warranty, in which case Wacom shall have no responsibility to repair or replace the product.
Usage
WARNING
Do not use the STU-500B LCD signature tablet in a facility control system that requires extremely
high reliability;
it may cause other electronic devices to malfunction, or other devices may cause the LCD
signature tab let to malfunction.
Where use is prohibited, power off the STU-500B to prevent the possibility of it causing other electronic
devices to malfunction. Wacom does not accept any liability for direct or consequential damages.
For details, please refer to your Warranty located at the end of this guide.
Environment
Temperature and humidity
Operating temperature and humidity: 5° to 35°C, 20 to 80% RH
Storage temperature and humidity: -10° to 60°C, 20 to 90% RH
CAUTION
Do not use or store the LCD signature tablet where:
Temperature changes are severe or exceed specifications (e.g., outdoors or inside a vehicle).
The LCD signature tablet and pen are exposed to direct sunlight or heat from an appliance, or are
exposed to water or any other kind of liquid.
Do not use the LCD signature tablet in a dusty environment;
this may damage the unit.
