INTERCEPTORS
1
Wade
Drains
‐
11910
CR492,
Tyler,
TX,
75706
‐
Phone:
800
‐
638
‐
9537
Fax:
888
‐
879
‐
9233
‐
www.wadedrains.com
3
‐
29
‐
17
INSTALLATION, OPERATION & MAINTENANCE
5100
Grease Interceptor
FEATURES
Wade 5000-5100 series interceptors are PDI (Plumbing & Drainage Institute) certified. All are
equipped with a one-piece cover secured with machine screws. A soft elastomeric gasket is
attached to the body of the interceptor to prevent odor from escaping. An air relief is provided to
eliminate siphonage and each unit is furnished with a flow control device to insure it will perform to
its rated capacity.
OPERATION
Waste water draining to the interceptor passes through the flow control device which regulates the
velocity to a controlled rate. As water enters the interceptor, the baffle arrangement reduces
turbulence to allow efficient separation. The grease, as separation occurs, floats to the top and is
accumulated. The waste water, relieved of contaminates, continues to flow through the trap and into
the drainage system. See diagram.
