◆
Input Connections
Connecting to Digital Sources
Avoid allowing static shocks to be applied to the inputs or outputs. To prevent
static shocks, touch any grounded surface, such as the Wadia 121Decoding
Computer chassis, before connecting or removing a cable. It is unlikely that a
static shock will damage the unit, but it may cause the Wadia 121Decoding
Computer circuitry to “lock-up” (see TroubleShooting: Lock-up – page 23).
Inputs and outputs can be safely connected to the Wadia 121Decoding Computer:
1 Before the unit is powered up
2 When the unit is in Mute Mode (see Mute Modes – page 17)
The Wadia 121Decoding Computer has five digital inputs:
AES/EBU with XLR type connector
Coax 1 RCA
Coax 2 BNC
Plastic Optical TOSLINK
USB 2.0
To connect a digital source, install the appropriate digital cable between the digital
output of that source and a digital input of the Wadia 121Decoding Computer.
12
