1 5 5 6 W o o d l a n d D r i v e . S a l i n e . M I 4 8 1 7 6 U S A
.
7 3 4 . 7 8 6 . 9 6 1 1
.
w w w . w a d i a . c o m
How do I reset my 170iTransport?
First you will want to undock your iPod. Then, unplug the power supply from the back of the 170iTransport and
wait 30 seconds. Finally, reconnect the power supply to the back of the 170iTransport and re-dock your iPod.
How do I know if my iPod is synced with the 170iTransport?
When the iPod is properly docked in the 170iTransport, the battery icon in the upper right hand corner of the
iPod screen will either have a lightning bolt or a power plug in it. If you have docked your iPod and waited up to
10 seconds for the handshake to happen between the iPod and the 170iTransport and there is still nothing in the
battery icon, make sure that the power supply is plugged into the wall and the other end of the power supply
cord is securely plugged into the 170iTransport.
Why can’t I see video from my iPod video when it is connected to my television with S-Video?
The iPod video will not present video to the 170iTransport S-Video output if the iPod is operating in “extended
interface” mode. Pressing the remote mode button will take the iPod video out of “extended interface” mode
enabling the S-Video and Analog audio outputs of the 170iTransport. Audio will be available only through the
Analog audio outputs.
How do I switch my 170iTransport over to output through the Analog Outputs?
When you dock you iPod into the 170iTransport the default mode for it to output signal is digital. The analog
outputs are not active at the same time as the digital output. Pressing the mode button will active the analog
outputs and deactivate the digital output. To enter digital audio mode again, your iPod must be removed from
the 170iTransport, and then re-inserted into the 170iTransport. This will re-establish the digital audio output.
Why do I sometimes hear a low-level hum coming from my television or sound system when I am
using the 170iTransports Analog Outputs?
If you are using the 170iTransport in the analog audio mode and undock your iPod you may hear a low-level hum
through your sound system. The analog output from the 170iTransport is a true pass-through from the iPod.
Undocking an iPod while in analog mode creates a floating input. To reduce the possibility of hum, change
inputs, or mute the input that the Wadia 170iTransport is connected to when undocking your iPod.
How do I reset my iPod if it locks up?
iPod – Toggle the Hold switch on and off
(slide it to Hold, then turn it off again)
. Press and hold the Menu and
Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
iPod touch – Press and hold the Sleep/Wake button and the Home button at the same time until you see the
Apple logo.
I hit the Mode button and now I don’t have any sound. How come?
The Mode button is what allows you to change from digital out to analog out. Digital out is inactive when the
analog out is active. The Mode button does not allow you to switch from analog out back to the digital out. To
switch back to digital out you will need to undock your iPod and then redock your iPod and let it resynchronize
with the 170iTransport.
series 1
17 0 i T r a n s p o r t
