Wadia 7, Information & Operation Manual

Wadia 7 CD TRANSPORT

OPEN 

/

 CLOSE: 

Pressing this button opens the disc drawer; pressing it again closes the

drawer. Pressing this button while a compact disc is playing stops play, clears any previously

programmed sequence of tracks, and opens the drawer.

PRECAUTION: 

Never impede the progress of the drawer while it is in motion (either opening

or closing).

PLAY: 

After a Compact Disc is loaded into the drawer, pressing this button plays the disc

beginning with the first track on the disc or in a sequenced program. Pressing this button

while the drawer is open, closes the drawer and begins play with the first track on the disc or

in a sequenced program. Pressing this button while the unit is in the PAUSE mode will
resume play.

PAUSE LED: 

The LED below the word PAUSE will light when play is suspended by pressing

the PAUSE button on the remote control.

STATUS LED: 

A single LED, centered over the drawer, is illuminated with a green color

when power is on and no disc is in the drawer. This LED turns to a red color when a disc is

inserted into the drawer, whether the disc is playing or not.

DISPLAY WINDOW: 

Information regarding the track, index, and time of the compact disc is

provided in the display window.

TRACK: 

This part of the display shows the number of the track being played. After inserting

a disc, and before play, it shows the total number of tracks on a disc.

INDEX: 

Before play, this part of the display is blank. If a disc being played has indexes, this

part of the display shows the indexes within the track being played beginning with 1 and
increasing throughout the track. If a track does not have indexes, this part of the display
shows 1 throughout the track. When Programming a sequence of tracks, the INDEX number
will act as a counter of the tracks in the program. After the program has been sequenced,
and play begins, the INDEX indicator will return to identifying index points throughout each
track.

TIME: 

The time counter in the display can be utilized in various modes through the remote

control. Before play, the total time on the disc, or in a sequenced program, is shown. The
word TOTAL appears in the display. Once a disc starts to play the elapsed time of that track
will be shown. Pressing the TIME button on the remote control once will cause the display to

indicate the remaining time in that track. The word REMAIN appears in the display. Pressing

the TIME button on the remote control again will cause the display to indicate the remaining
time on the entire disc, or in a sequenced program. The words TOTAL REMAIN appear in
the display.

9