Wadia
Digital
2
Chambers
Street
•
Binghamton,
NY
13903
•
(855)
326
Ͳ
9816
•
www.wadia.com
Next, open DSP and Output format under Settings, in the top left corner please check
Output Format and Volume Leveling. This will allow access to the output format and
activate Volume Leveling.
Volume Leveling will adjust the playback volume of each song in relation to all others in
the music library. Since these files will be manipulated at 32 or 64 bits this will not
change the actual volume of the songs but will adjust their playback relationship to
each other so dramatic volume changes are lessened. Volume Leveling does not
change the dynamic range of the recording in any way.
Output Format will allow the actual playback resolution bit rates to be set which also
determines the file types that can be played.
All other tabs in this left hand list can be used but this will result in the loss of Bit
Perfect playback, which for maximum fidelity, is the goal of these adjustments.
B-Clip Protection should be checked as this will prevent digital overload which can
produce harsh sounds. Volume Leveling will also protect against clipping. If di122 is
connected to a power amp of low sensitivity Volume Leveling can be shut off for
additional gain or volume.
In the center of the screen output formats are set. This is two columns of input, the
original file encoding, and output what is sent to the DAC. By checking No change the
di122 will see each file in its’ original format. If all the formats are set to 192,000Hz, as
