31
VAS 581 001A
Operation
1. First fit the service hoses for the AirConServiceCenter to the vehicle
air conditioning system, and open the service couplings.
2. Press cursor key
or
to return to the basic menu.
3. In the basic menu, use the cursor keys
or
to select
“Short
selection”
:
4. Press
ENTER
to confirm.
5. Use the keypad (
8
) and the cursor keys to enter the vehicle data.
6. Press
ENTER
to confirm.
7. Enter the refrigerant fill quantity. Use the value shown on the filling
quantities sticker in the vehicle and enter it using the keypad (
8
) and
the cursor keys and press
ENTER
.
8. Use the cursor keys
or
to select whether the air conditioning
system has twoconnections (high pressure and low pressure) or only
one connection (high pressure or low pressure).
Confirm with
ENTER
.
✓
Fully automatic air conditioning service is started.
The refrigerant is analyzed during the air conditioning service (see
chapter “Analyzing refrigerant” on page 25).
✓
After the air conditioning service has finished, you will be prompted to
disconnect the hoses (
12
) and (
13
) of the AirConServiceCenter from
the vehicle air conditioning system.
9. Disconnect the service hoses (
12
) and (
13
) and press
ENTER
to
confirm.
The service hoses are then emptied. The unit is then ready for fur-
ther use.
10. Put the valve caps of the vehicle air conditioning system back on the
connections.
Short selection
Free selection
Other selections
ENTER-OK
HP/LP
PORT
HP
PORT
LP
PORT
ENTER-OK STOP-EXIT
VAS-581-001A--O-US.book Seite 31 Montag, 17. Februar 2020 8:25 20
