EN
101
AirConServiceCenter
Operation
24. Deselect
“Rec/Recycling phase”
using
No
(the setting flashes) and
press
ENTER
to confirm.
25. Select
“Vacuum phase”
(the setting flashes) and press
ENTER
to
confirm.
26. Select
“Filling phase”
(the setting flashes) and press
ENTER
to
confirm.
27. Enter the refrigerant filling quantity (note the oil filling quantity of the
compressor).
28. Then follow the instructions on the display (
6
):
Select the setting (which then flashes) and press
ENTER
to confirm.
29. Select
“Process start”
by pressing
ENTER
.
✓
After filling is complete, you will be prompted to disconnect the hoses
of the AirConServiceCenter from the vehicle air conditioning system.
30. Disconnect the service hoses (
10
) and (
11
) and press
ENTER
to
confirm.
The service hoses are then emptied. The device is then ready for
further use.
31. Put the valve caps of the vehicle air conditioning system back on the
connections.
Summary of Contents for AirConServiceCenter ASC1000G
Page 2: ......
