EN
Service tasks
AirConServiceCenter
108
9.5
Changing the vacuum pump oil
!
1. Before changing the oil, let the vacuum pump run for about
10 minutes (manually, via the menu).
2. Take off the front panel:
Undo the screws (
D
) on the control panel and lift it up. Then undo the
screws (
E
) on the bottom of the front panel and take it off.
3. Place a receptacle with a capacity of at least a ½ litre under the
AirConServiceCenter. The oil from the vacuum pump flows through
the opening (
I
) in the base of the device.
4. Unscrew the oil filling plug (
G
).
5. To drain the oil, unscrew the oil drain plug (
J
).
WARNING!
Switch off the AirConServiceCenter and unplug it from the power
supply before opening the housing.
D
E
D
E
G
H
J
I
Summary of Contents for AirConServiceCenter ASC1000G
Page 2: ......
