EN
111
AirConServiceCenter
Service tasks
“Vacuum time”
indicates how long the vacuum pump was operating in
total.
“Service completed”
indicates the amount of service work performed on
the air conditioning service unit.
9.7
Correcting the filling quantity for long service
hoses
I
1. In the basic menu, use the cursor keys
or
to select
“Other
selections”
:
2. Press
ENTER
to confirm.
3. Use the cursor keys
or
to select
“Service”
:
4. Press
ENTER
to confirm.
5. Enter the password
“7732”
.
6. Enter the hose length in centimetres.
7. Press
ENTER
to confirm.
Vacuum time
Total
07/03/14
min.
79
STOP-EXIT
Service completed:
Total
08/03/14
Total
4
STOP-EXIT
NOTE
If longer or shorter service hoses are required for the device, you
need to adjust the filling quantities to the new hose lengths.
The service hoses for the high and low pressure sides must always
be of the same length, as otherwise the filling quantities will not be
correctly measured.
Short selection
Free selection
Other selections
ENTER-OK
Int. vessel filling
Flushing
Reset scales.
Service.
Summary of Contents for AirConServiceCenter ASC1000G
Page 2: ......
