EN
Operation
AirConServiceCenter
84
8.2
User codes
It is possible to protect the air conditioning service station from unauthor-
ised access using personal user codes. When this function is activated,
the system queries the user code after being switched on, and the station
cannot be started without it. Up to 10 different users can be created, each
with individual codes.
8.2.1
Creating user codes
1. In the basic menu, use the cursor keys
or
to select
“Other
selections”
:
2. Press
ENTER
to confirm.
3. Use the cursor key
to select
“Service”
and press
ENTER
to
confirm:
4. To access the
“ADM”
administrator menu, enter the password
“9786”
and press
ENTER
to confirm:
5. Enter the administrator code
“0000”
(default setting) and press
ENTER
to confirm:
I
6. Enter the new administrator code:
Short selection
Free selection
Other selections
ENTER-OK
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
Service.
----
Insert ADM Code
----
NOTE
For security reasons, a new administrator code must be selected each
time, but not
“0000”
as this will deactivate the entire function.
Users can be created using the administrator code.
ADM AREA
Insert new code
----
Summary of Contents for AirConServiceCenter ASC1000G
Page 2: ......
