EN
89
ASC5100G
Operation
8.7.3
Filling process
1. Enter the preferred settings and press
ENTER
to confirm.
2. If
“Filling phase”
has been selected, enter the required value, oth-
erwise continue with chapter “Selecting connections” on page 90.
3. Enter the amount of refrigerant oil which was previously drained or
which is required.
4. Press the cursor key
.
5. Enter the refrigerant quantity.
6. Press
ENTER
to confirm all settings.
I
Filling phase?
Yes
No
ENTER-OK STOP-EXIT
PAG oil
ml.
0
UV tracer
ml.
0
Refrigerant
g.
500
ENTER-OK STOP-EXIT
NOTE
If extraction is taking place in the same process sequence, the quan-
tity of fresh oil is counted as an additional filling quantity, and is
added to the drained oil quantity extracted beforehand. If this value
is set to 0, exactly the quantity of oil which was extracted will be filled
again.
To add fresh oil, a vacuum process must be performed in the same
process sequence. If no vacuum process has been selected, only
refrigerant can be selected in the filling menu.
Summary of Contents for AirConServiceCenter ASC5100G
