7
The Battery Refresher does not replace a charger, but works
only in conjunc-tion with a charger or when travelling.
Installation.
Connect the black cable (-) with the cable lug to the
negative pole of the battery.
Connect the red cable (+) to the positive pole of the battery.
It is not neces-sary to remove the pole terminals from the
battery poles for this. The Re-fresher will be destroyed if the
connections are inserted the wrong way round.
It is best to fasten the Refresher with the attached
double-sided adhesive tape on a suitable spot (it can be
also glued to the battery.) But it is also possible to fasten
the Refresher with screws of 3 mm on a wall (not battery).
Important notes
The Battery Refresher may only be used with pure lead
batteries. (wet, gel, fleece).
Batteries with precious metal alloys are not suitable.
Defective batteries such as those with a cell plug may not
be used.
GB
Collected_Battery ref#5872F.qxd 16/06/03 13:16 Page 7
