EN
CFX95DZ2
Operation
13
➤
Remove two plastic covers from the centre hinge (
A
).
➤
Remove four screws from the centre hinge (
B
) and take off the hinge.
➤
Remove the plastic cover from new centre hinge position with a small
screwdriver and re-fit to old hinge position (
C
).
➤
Re-fit centre hinge in new position.
➤
Insert the lids in the hinges on the opposite side (
D
).
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit
as follows:
➤
Switch on the cooler.
➤
Press the “SET” button (fig.
3
4, page 9) three times.
➤
Use the “UP +” (fig.
3
10, page 9) or “DOWN –” (fig.
3
9, page 9)
buttons to select Celsius or Fahrenheit.
✓
The selected temperature units then appear in both displays for a few
seconds. The displays flash several times before returning to the current
temperature.
A
B
C
D
6
