Using the refrigerator
COOLMATIC CR Series
44
Proceed as follows when you connect the refrigerator to the AC supply:
➤
Fix the rectifier as shown in the location foreseen, behind the refrigerator
(fig.
g
, page 10).
➤
Protect the AC circuit using a slow-blow fuse (250 V/4 A).
➤
Connect the power cable to the AC power supply.
➤
Plug in the connecting cable to the AC socket (fig.
g
1,page 10).
Proceed as follows when you connect the refrigerator to a DC supply when
a rectifier is fitted:
➤
Connect the loose DC cable (fig.
g
2, page 10) to the battery:
– Red cable: positive battery terminal
– Black cable: negative battery terminal
8
Using the refrigerator
I
Note
Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter “Cleaning and care” on page 48).
8.1
Energy saving tips
z
Choose a well ventilated installation location which is protected from
direct sunlight.
z
Allow hot food to cool down first before you put it in the refrigerator.
z
Do not open the refrigerator more often than necessary.
z
Do not leave the door open for longer than necessary.
z
Defrost your refrigerator as soon as a layer of ice forms.
z
Avoid unnecessarily low temperature settings.
z
Clean dust and dirt from the condenser at regular intervals.
_cr-kuehlschraenke.book Seite 44 Montag, 6. April 2009 1:03 13
