43
Scope of delivery (see
✎
B 1 to B 12).
No.
Quantity Designation
Article No.
B 1
1
ECU (electronic control unit)
MS-650-RX
B 2
1
Relay for vehicle horn connection
MS-650-RL
B 3
2
Hand transmitter
MS-650-TX
B 4
1
Status LED with cable and socket
MS-650-SL
B 5
1
Access switch with cable
MS-650-AS
B 6
1
Mounting material incl. switch
MS-650-KIT
B 7
1
Ultrasonic electronics module
MS-650-US
B 8
2
Ultrasonic sensors
MS-650-US
B 9
1
Main cable set with connector (P3)
MS-650-KA3
B 10
1
Cable set for central locking (P2)
MS-650-KA2
B 11
1
Cable set with connector (P1)
MS-650-KA1
B 12
2
Alarm warning stickers
MS-650-WS
Selection of the locations (see
✎
B 9)
1. ECU (electronic control unit)
Position the ECU inside the passenger compartment with the main
connecting cable downwards below the instrument panel. The unit should
be mounted in a location that is not in the influence zone of strong
electronic fields, e.g. ignition conductor or central control unit.
Avoid to attach the ECU directly to the air outlet nozzles.
The attached screws or double-sided pad must be used when mounting.
All existing drill holes in the vehicle should be used as far as possible.
2. Ultrasonic sensors
Mount the ultrasonic sensors at the top of each A-pillar using the screws
provided in the kit. For best performance, ensure that both ultrasonic
sensors point to the centre of the rear window.
MS-650.qxd 13/08/03 12:58 Page 43
