MagicSafe MS670
Installing MagicSafe
39
6.2
Installing the controller
➤
Select a suitable installation location (fig.
7
, page 5).
I
Note
On selecting the installation location, observe the following
instructions:
➤
Install the control unit
– In the vehicle interior
– In such a way that you can read the LED and operate the button
– Under the dashboard
–
Not
in areas where strong electrical fields can interfere with it, e. g.
ignition cables or central control electronics
–
Not directly
next to ventilator nozzles.
➤
Where possible, use existing holes in the vehicle.
➤
Screw the control unit firmly to the vehicle with the screws supplied or use
double-sided adhesive tape.
6.3
Installing the alarm siren
The alarm siren can be mounted in the engine compartment.
a
Caution!
When mounting it, ensure that the installation location is
–
Not
in an area exposed to splashing water
–
Not
near the exhaust system
–
Cannot
be accessed from underneath the vehicle, to ensure
that it cannot be sabotaged.
➤
Install the alarm siren and the fastening rail as shown in fig.
6
, page 5.
6.4
Installing the ultrasonic module
➤
Select a suitable installation location on the hinge pillar.
➤
Screw the ultrasonic module firmly to the vehicle with the screws supplied
or use double-sided adhesive tape.
_MS-670.book Seite 39 Donnerstag, 8. Mai 2008 4:55 16
