Connecting the electrical power to MagicSafe
MagicSafe MS670
44
Brown (P9)
➤
Connect this cable to the blue alarm siren cable.
Green (P11) and green/yellow (P12)
➤
This cable can interrupt any electrical circuit (e. g. fuel pump, starter etc.).
The output can be charged with a maximum of 8 A.
Connecting the alarm siren
➤
Guide this cable through the splash-protection wall in the engine
compartment.
➤
Connect the red cable of the alarm siren to a cable with a permanent
+12 V charge (te30).
➤
Connect the blue cable of the alarm siren to the brown cable (terminal
P9
)
of the connection cable.
➤
Connect the grey cable to the engine bonnet contact switch (
3
).
➤
Connect the black cable to earth (terminal 31).
Connecting the key holder
➤
Insert the red two-pin plug (
8
) of the connection cable in the red socket (
8
)
of the key holder.
➤
Insert the white two-pin plug (
9
) of the connection cable in the white
socket (
9
) of the key holder.
Violet (P20)
➤
Connect this cable to a connection which is switched by the ignition
(terminal 15).
Connecting the ultrasonic module
➤
Insert the white three-pin plug (
11
) in the connection of the ultrasonic
module.
_MS-670.book Seite 44 Donnerstag, 8. Mai 2008 4:55 16
