General safety instructions
PerfectCharge IU1012
19
Electrical cables
z
Always use sockets which are grounded and secured by
residual current circuit breakers.
z
If cables have to be fed through metal walls or other walls with
sharp edges, use ducts or tubes to prevent damage.
z
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
z
Do not pull on the cables.
z
Do
not
lay the 230 V mains cable and the 12 V DC cable in the
same duct!
z
Fasten the cables securely.
z
Lay the cables so that they cannot be tripped over or damaged.
2.3
Operating the device safely
z
Caution!
Note the following basic safety information when using electrical
devices to protect against:
– Electric shock
– Fire hazards
– Injury
z
Operate the device only if you are certain that the housing and
the cables are undamaged.
z
Make sure the air inlets and outlets of the device are not cov-
ered.
z
Ensure good ventilation.
z
Even after the fuse triggers, parts of the IU0U automatic charger
remain live.
z
Always disconnect the power supply when working on the de-
vice.
_910-012PFC.book Seite 19 Mittwoch, 21. Juni 2006 4:12 16
