PerfectCharge IU1012
Mounting the IU0U automatic charger
22
5.1
Control elements
6
Mounting the IU0U automatic charger
6.1
Mounting instructions
If you wish to mount the IU0U automatic charger in a fixed position, please
observe the following
mounting instructions
:
z
You can mount the IU0U automatic charger either horizontally or vertically.
z
Do
not
mount the IU0U automatic charger
– In wet or damp environments
– In the vicinity of combustible materials
– In areas where there is a danger of explosions.
z
The place of installation must be well-ventilated. A ventilation system
must be present for installations in small, closed spaces. The minimum
clearance around the IU0U automatic charger must be at least 25 cm (
2
,
page 3).
z
The air intake on the underside and the air outlet on the rear of the IU0U
automatic charger must be kept clear.
z
For ambient temperatures higher than 40 °C (such as in engine or heating
compartments, or direct sunlight), the heat from the IU0U automatic
charger under load can lead to the automatic shut-down.
z
The installation surface must be level and sufficiently sturdy.
Item
in
1
, page 3
Explanation
1
Main switch
2
Mains connection
3
Cable with battery connection terminals
4
Fuse
5
Air outlet
6
Status LED
_910-012PFC.book Seite 22 Mittwoch, 21. Juni 2006 4:12 16
