IU6, IU8, IU12
Using the charger
37
The charging display consists of three LEDs that show the
charging status of the battery:
I
Note
With the conservation charging function, the battery is constantly
recharged to compensate for self-discharging.
I
Note
Observe the following special case:
The charger has a control function that checks the voltage of the
battery before charging. If you connect a battery that is completely
charged (> 13.2 V) or a deep-discharged battery, the charger will
not switch on and the blue charging display remains off.
➤
Switch off the charger.
➤
Remove the terminals from the battery.
Display
Explanation
lower LED flashes
the battery is almost empty
The bottom and middle LEDs
flash
the battery is approx. 50% charged
All three LEDs flash
the battery is approx. 80% charged
all three LEDs are lit
charging is roughly 90% complete
IU6:
the battery is fully charged
If the charge current falls below 0.2 A, the
device switches off (the LEDs go out).
IU8, IU12:
the battery is fully charged and the
charger switches to conservation charging
mode
All three LEDs remain on.
_IU6_IU8_IU12_BA_10s.book Seite 37 Mittwoch, 16. Januar 2008 2:06 14
Summary of Contents for PerfectCharge IU6
Page 3: ...IU6 IU8 IU12 3 1 2 5 3 4 _IU6_IU8_IU12_BA_10s book Seite 3 Mittwoch 16 Januar 2008 2 06 14...
Page 4: ...IU6 IU8 IU12 4 A B 6 _IU6_IU8_IU12_BA_10s book Seite 4 Mittwoch 16 Januar 2008 2 06 14...
Page 5: ...IU6 IU8 IU12 5 1 2 3 7 1 2 8 _IU6_IU8_IU12_BA_10s book Seite 5 Mittwoch 16 Januar 2008 2 06 14...
