MPV-32
17
6
Operation
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons
(please also refer to the “Cleaning and maintenance” chapter on
page 19).
6.1
Energy saving tips
z
Choose a well ventilated installation location which is protected against
direct sunlight.
z
Allow food to cool down first before placing it in the device to cool.
z
Do not open the cooler more often than necessary.
z
Do not leave the lid or door open for longer than necessary.
6.2
Switching on the cooler
If you connect the device to the cigarette lighter or the 12 V socket
of your vehicle, remember that the ignition must be turned on to
supply the device with power.
Ensure that the objects placed in the cooler are suitable for
cooling/warming to the selected temperature.
➤
Place the device on a firm base.
➤
Connect the device with the cable supplied to the 12 V socket or the
cigarette lighter in the vehicle (
3
, page 3).
➤
Press the blue button (
2
1, page 3) on the control panel to start “cooling”
or
Press the red button (
2
5, page 3) on the control panel to start “heating”.
You can switch between heating and cooling modes during
operation by pressing the corresponding button.
✓
The cool box starts cooling/heating the interior and the appropriate LED
lights up.
_MPV-32.book Seite 17 Montag, 26. April 2004 1:44 13
