EN
85
VAS 6380B / VAS 6381B
Initial start-up
7.4
Entering company data
The company data is printed out with every service log.
1. In the basic menu, use the cursor keys
or
to select
“Other selections”
:
2. Press
ENTER
to confirm.
3. Use the cursor key
to select “
Service.
”.
4. Press
ENTER
to confirm.
5. Enter the password
“3282”
.
6. The company data is shown in the third line of the display (
6
).
You can enter five lines, each with up to 20 characters.
The display shows the number of lines of company data after the
message
“Enter company data.”
(
“01”
to
“05”
).
Use the cursor keys
or
to select the line of company data you
want.
7. Use the keypad (
7
) and the cursor keys to enter the data.
To switch between upper and lower case, press the Info key
.
To delete a character, briefly press the
C
key.
To delete the current line, press and hold down the
C
key.
8. Press
ENTER
to confirm.
9. Press
STOP
. The set data is activated.
10. Press
STOP
again to access the standby menu.
S h o rt s e l e c t i o n
□
F r e e s e l e c t i o n
□
O t h er s e l e c t i o n s
■
E N T ER - O K S T O P - E X I T
⬍
WaecoVAS6380B-6381B_OPM_4445101232_EMEA(de-en-es-fr-ru)_202x-xx-xx.book Seite 85 Montag, 2. November 2020 1:46 13
