Regular WAFE service inspection
For year
Detailed specification of all actions is provided in WAFE certificated Service manual:
WAFE 350 Energy recovery ventila-
tion unit
, to which your service technician has access. The brief specification in this section is indicative and it does not
necessarily contains all steps of the work.
Correct execution of Regular WAFE servece inspection is a condition to extend the warrenty for another year. The
owner of the unit takes responsibility for assuring the inspection and recording the check in Service Book.
1.
Inspection and replacement
of filters
Wear and tear of filters has been checked, clogged
filters has been replaced
Action performed?
2.
Cleaning the heat exchanger
The heat exchanger has been taken out and washed
(optional) and the inner part has been cleaned
.
3.
Visual check
Flaps, washers, pipe connection and condensate
drainage has been checked
Inspection performed by:
Inspection date:
CRN*:
Telephone:
Actions outside of Regular WAFE service inspection
DATE
ACTION PERFORMED
SERVICE TECHNICIAN
