WAFER GSM-KEY REMOTE CONTROL UNIT
http://www.waferstar.com
WAFER GSM-KEY PROGRAMMING
You also can program the GSM-KEY with SMS commands using your phone. It is safe to do
so because in addition to the fact that other people may not know the number of the SIM inserted
in it, we also use a Password that makes it impossible for anybody who doesn't know it to access
the system by chance.
Remember that commands must be CAPITAL LETTERS. It is PWD not pwd, CAP not Cap
etc. Don't add spaces or any other character.
Some complicated Instructions,that cann’t be programmed by the phone SMS. That would
need to use the PC software to program and inquire the status of the terminal.
The bellow wire picture is to show how to connect the cable to the PC program connector
with the Program adapter.Please connect it in the right direction with the picture.
GSM-KEY PC Program Software interface
1.
Setting and Log page switch
2.
Open saved file
3.
Save units phone numbers in your computer for future changes
4.
Save in a new file name
5.
Communitcaton selection ,Com port configuration
6.
Connect to the unit
7.
Select Language
8.
Setting Tab – Insert regular/Special phone numbers,miscellaneous
Fast Teach Button:
On the board version of GSM-KEY-ADC, there is a
“ Fast Learn Button”
.
When you want to do the fast program to program your number to the WHL list to GSM-KEY device, you
can press the button until the LED light, then use your phone to dial the number of GSM-KEY, when pickup
the calling,the Teach LED would flash,reject the calling and save the phone number into the device.
