Power Dome LT by Wagan Tech
6
Do not connect to the negative terminal. Connect the black (-) clamp to a non-mov-
ing metal part of the vehicle.
Turn the Master on/off safety switch to the ON position.
Start the vehicle. If the vehicle does not start, wait 3 minutes before trying again
(failure to wait may damage the Power Dome LT).
After the vehicle starts, disconnect the black negative clamp first before the red
positive clamp.
Specifications
Battery
12 Volt 12 Amp Rechargeable Sealed Lead Acid Battery
Work Light
x LEDs
Compressor
260 PSI Reading Gauge
Inverter
110 volt AC 200 Watt
12V DC Socket
12 volt 10A max.
USB Port
5 volt 500mA max.
Charging Time
26-28 hours by AC charger at home 6–8 hours by DC charger in
vehicle when engine is running.
•
•
•
•
R
www.wagan.com
Summary of Contents for 2464
Page 1: ...Item no 2464 Article no 2464 User s Manual Guide d Utilisation Power Dome LT R ...
Page 2: ......
Page 10: ......