600 Amp Battery Jumper
™
by Wagan Tech
®
www.wagan.com
10
USB POWER PORT
You may operate the USB port, worklight, and DC socket at the same time.
1. Open the dust cover.
2. Connect a user-supplied USB cable to either of the USB power ports on the Battery Jumper.
3. Press the USB power button located to the right of the ports to turn the power on. The USB
power indicator LED will light up.
4. When charge is complete, press the USB power button again to turn the power off.
5. Disconnect the USB cable from the Battery Jumper.
WORKLIGHT
You may operate the worklight, USB ports, and DC socket at the same time.
1. Set the Worklight Switch to the “|” position.
2. The 30 LEDs will illuminate.
3. Turn the light off when it is not in use.
