©2017 Wagan Corporation. All Rights Reserved.
Wagan Tech and
wagan.com
are trademarks used by Wagan Corporation.
User’s Manual—Read before using this equipment
4
readout will blink 3 times at the desired preset pressure, and it will then
change back to the current pressure of the item that you are inflating.
• User may press the "Display/Mode" button to read pressure in
PSI/BAR/KPA scale.
9. Slide the power switch to turn the inflator on. The preset pressure can be
changed during inflation by pressing the pressure adjusting buttons (+/−)
to the new desired pressure. The inflator will shut off automatically at the
desired pressure that you have programmed.
• While in use, the user can slide the power switch to stop the tire
inflator before it reaches the preset pressure.
10. Disconnect the valve adapter and power cord once the inflation is
complete. Store your tire inflator.
11. To reset the air compressor, slide the "On/Off" switch.
WARNING: DO NOT OVERINFLATE PRODUCTS BEYOND THE
MANUFACTURER’S RECOMMENDATIONS.
WARNING: NEVER LEAVE COMPRESSOR UNATTENDED WHILE IN USE.
CARE AND MAINTENANCE
• Use only mild soap and a damp sponge to clean compressor.
• Do not immerse any part in liquid.
