Digital Remote Interface by Wagan Tech
®
5
www.wagan.com
• AC frequency - The default setting for the frequency is 60Hz
Warning: Before changing this setting, be sure to confirm the frequency
requirement of the appliances being connected to the inverter. Wagan will
not be responsible for damage to appliances that are not compatible with the
inverter setting.
• Power Save - Turning on the Power Save function will enable the inverter to
enter a standby mode when no load is applied.
• Battery type - adjusts operational and alarm settings based on battery type.
- Lead acid: 10.5V (alarm), 10V (shutoff)
- Lithium: 11.5V (alarm), 11V (shutoff)
CHANGING INVERTER SETTINGS
• DC Charger view: There are no settings or selections controlled in this view.
