Smart AC
®
100W USB Inverter with FM Transmitter by Wagan Tech
®
3
www.wagan.com
©2012 Wagan Corporation. All Rights Reserved.
Wagan Tech and
wagan.com
are trademarks used by Wagan Corporation.
5 VOLT DC USB PORT
The USB Port can continuously power and recharge MP3 players, cell
phones and other devices.
1. Power the inverter as described earlier.
2. Insert the USB plug of the device you want to power or recharge
into the USB Power Port of the inverter.
3. Operate your device normally, as described by the manufacturer.
12 VOLT DC POWER OUTLET
Use the 12 Volt DC Outlet for powering or recharging 12 Volt DC
devices (up to 10 amperes) while using one of the other power outlets.
1. Power the inverter as described earlier.
2. Insert the appliance’s 12 Volt DC plug into the Inverter’s 12 Volt DC
Power Outlet.
3. Operate the appliance normally, as described by the manufacturer.
FM TRANSMITTER
1. Power the inverter as described earlier.
2. Insert the 3.5mm plug of the supplied audio cable into the
headphone jack of an MP3, CD, or DVD player. Insert the other
end of the cable into the 3.5mm stereo input jack of the inverter.
Tune your car radio to an FM frequency that is not being used by
any local FM broadcast stations.
3. Press the Play Button on the player that you connected to the
inverter. When an input audio signal is detected, the transmitter will
start.
Summary of Contents for Smart AC 100W USB
Page 15: ......
