background image

16 

Vector Grip

GB

Important notes on product liability

As a result of an EC regulation being effective as from January 1, 1990, the manufacturer shall only be liable 

for his product if all parts come from him or are released by him, and if the devices are properly mounted 

and operated.
If the user applies outside accessories and spare parts, the manufacturer´s liability can fully or partially be 

inapplicable; in extreme cases usage of the entire device can be prohibited by the competent authorities 

(employer´s liability insurance association and factory inspectorate division).
Only the usage of original WAGNER accessories and spare parts guarantees that all safety regulations are 

observed.

3+2 years guarantee for professional finishing 

Wagner professional guarantee 
(Status 01.02.2009)

1.  Scope of guarantee 

All Wagner professional colour application devices (hereafter referred to as products) are carefully inspected, 

tested and are subject to strict checks under Wagner quality assurance. Wagner exclusively issues extended 

guarantees to commercial or professional users (hereafter referred to as “customer”) who have purchased 

the product in an authorised specialist shop, and which relate to the products listed for that customer on 

the Internet under www.wagner-group.com/profi-guarantee. 
The buyer’s claim for liability for defects from the purchase agreement with the seller as well as statutory 

rights are not impaired by this guarantee. 
We provide a guarantee in that we decide whether to replace or repair the product or individual parts, or 

take the device back and reimburse the purchase price. The costs for materials and working hours are our 

responsibility. Replaced products or parts become our property. 

2. Guarantee period and registration 

The guarantee period amounts to 36 months. For industrial use or equal wear, such as shift operations in 

particular, or in the event of rentals it amounts to 12 months.
Systems driven by petrol or air are also guaranteed for a 12 month period. 
The guarantee period begins with the day of delivery by the authorised specialist shop. The date on the 

original purchase document is authoritative. 
For all products bought in authorised specialist shops from 01.02.2009 the guarantee period is extended to 

24 months providing the buyer of these devices registers in accordance with the following conditions within 

4 weeks of the day of delivery by the authorised specialist shop. 
Registration can be completed on the Internet under www.wagner-group.com/profi-guarantee. The 

guarantee certificate is valid as confirmation, as is the original purchase document that carries the date of 

the purchase. Registration is only possible if the buyer is in agreement with having the data being stored 

that is entered during registration. 
When services are carried out under guarantee the guarantee period for the product is neither extended nor 

renewed. 
Once the guarantee period has expired, claims made against the guarantee or from the guarantee can no 

longer be enforced. 

3.  Handling 

If defects can be seen in the materials, processing or performance of the device during the guarantee 

period, guarantee claims must be made immediately, or at the latest within a period of 2 weeks. 
The authorised specialist shop that delivered the device is entitled to accept guarantee claims. Guarantee 

claims may also be made to the service centres named in our operating instructions. The product has to 

be sent without charge or presented together with the original purchase document that includes details 

of the purchase date and the name of the product. In order to claim for an extension to the guarantee, the 

guarantee certificate must be included. 
The costs as well as the risk of loss or damage to the product in transit or by the centre that accepts the 

guarantee claims or who delivers the repaired product, are the responsibility of the customer. 

Summary of Contents for 2367218





















Reviews: