18
Control Pro 250 M / 275 M
DE
EN
3. Safety of Persons
a) Be attentive. Pay attention to what you are doing and work sensibly with a power tool. Do not use the tool if you are
tired or under the influence of drugs, alcohol or medication.
Just a moment of inattentiveness while using the tool can lead
to serious injuries.
b) Wear personal safety equipment and always wear safety goggles.
Wearing personal protective equipment, such as dust
mask, non-slip safety shoes, safety helm or ear protection, depending on the type of power tools, reduces the risk of injury.
c) Avoid accidental starting-up. Ensure that the switch is in the "OFF" position before inserting the plug into the socket.
Accidents can occur if you carry the power tool while your finger is on the switch or if you connect the power tool to the power
supply which it is on.
d) Remove setting tools or wrenches before switching on the power tool.
A tool or wrench that is in a rotating tool part can
lead to injuries.
e) Avoid an unnatural posture. Ensure that you are standing securely and have your balance at all times.
This ensures that
you can control the tool better in unexpected situations.
f) Wear suitable clothing. Do not wear wide clothing or jewelry. Keep your hair, clothes and gloves away from moving
parts.
Loose clothing, jewelry or long hair can be caught in moving parts.
g) Do not lull yourself into a false sense of security and do not think yourself above the safety rules for electric tools,
even if you are familiar with the electric tool following extensive practical experience.
Careless use can lead to serious
injuries in fractions of a second.
4. Careful Handling and Use of Power Tools
a) Do not overload the tool. Use the power tool designed for the work that you are doing.
You work better and safer in the
specified performance range if you use the suitable power tool.
b) Do not use power tools whose switch is defective.
A power tool that cannot be switched on or off is dangerous and has to be
repaired.
c) Remove the plug from the socket before carrying out tool settings, changing accessories or putting the tool away.
This precautionary measure prevents unintentional starting of the tool.
d) Store unused power tools so that they are inaccessible to children. Do not let persons use the tool who are not
familiar with it or who have not read these instructions.
Power tools are dangerous when they are used by inexperienced
persons.
e) Take proper care of your tools. Check whether the moving parts function trouble-free and do not jam, whether parts
are broken or damaged so that the tool function is impaired.
Have damaged parts repaired before using the tool. Many
accidents have their origin in power tools that have been maintained badly.
f) Use the power tool, accessories, insert tools, etc. in accordance with these instructions and in a fashion specified for
this special tool type. Take the working conditions and the activity to be carried out into consideration.
The use of
power tools for purposes other than the intended ones can lead to dangerous situations.
g) Keep the handles and grip surfaces dry, clean and free of oil and grease.
Slippery handles and grip surfaces hamper safe
operation and control of the electric tool in unforeseen situations.
5. Service
a) Have your tool repaired only by qualified specialist personnel and only with original spare parts.
This ensures that the
tool safety is maintained.
a) If the supply cord is damaged, it must be replaced by the manufacturer or it’s service agent or a similarly qualified
person in order to avoid a safety hazard.
Health protection
Danger
Caution! Wear breathing equipment: Paint mist and solvent vapors are damaging to health. Always
wear breathing equipment and only work in well ventilated rooms or using supplementary ventilating
equipment. It is advisable to wear working clothing, safety glasses, ear protection and gloves
Flammable materials
Danger
Do not use the spray guns to spray flammable substances.
