68
OPERATING MANUAL
VERSION 05/2017
ORDER NUMBER DOC 2357061
18
Save Start/Stop totals USB stick
"On": Start/Stop totals are written continuously
to a USB stick (USB stick must be plugged in).
PC data archiving
"On": Data are archived continuously on PC. (Operating manual
for PC data archiving, see Chapter
)
19 For AIS-B:
AIS warning limit
Minimum injection quality (opening time of hardener dosing
valve as a percentage). If the value falls below this, a warning is triggered (W123 -
W125).
AIS lower limit
If the value falls below this, the AIS optimizes the injection quality.
(Default value = 50%)
AIS upper limit
If the value exceeds this, the AIS limits the injection quality.
Thereby smooth operation is ensured. (Default value = 80%)
Valve > open AIS open
If the B valve is continuously opened for longer than
the stated time, too little product can flow through. The AIS allows more product
through. (Default value 1.0 sec.) Repetition after each
repetition interval AIS open
.
(Default value 0.5 sec.)
AIS open when stopped
Number of steps which the AIS is to open when mixing
operation is ended. (Default value 3)
AIS min. flow
Minimum flow of all components for AIS to undertake regulation.
(Default value 20 cc/min)
20 For AIS-B:
AIS hysteresis
Number of steps which do not yet have impact when AIS switches
(e.g., close open) and are therefore inserted at the switchover points. (Default value
1)
AIS Number of cycles with X guns
Number of steps which the AIS is to open or
close when an additional gun is switched on or off.
21+22 Like pages 19 + 20, but for AIS-C.
23+24 Like pages 19 + 20, but for AIS-D.
