79
OPERATING MANUAL
VERSION 05/2017
ORDER NUMBER DOC 2357061
8.5.4 SPRAYING WITH GUN FLUSH BOX
Same procedure as in Chapter
, however:
before actuating the START push button, insert the spray gun into the gun flush box.
Remove the spray gun after filling.
8.5.5 INTERRUPTING WORK
The STOP push button stops the coating process. All product valves are closed.
For electrostatic spray guns: switch off electrostatics.
8.5.6 CHANGING THE PAINT RECIPE
The recipe change flush is executed on all spray guns while the spray
nozzle is inserted.
Actuate the STOP push botton.
Select the new paint recipe on the screen (home page).
Without gun flush box
With gun flush box
− Press START push button.
− Insert spray gun(s) in gun flush box.
The spray gun is automatically opened
as necessary.
− Point the spray gun into the metal
bucket. Open the gun step by step.
Avoid splashback.
− Press START push button.
The system is flushed (recipe change flushing "
").
Subsequently the new lacquer is filled.
As soon as the green START push button lights up and the home page appears on the
screen, the system is ready for spraying.
8.5.7 A VALVE SELECTION AT START
Possibly, a list of the A valves appears for selection at the start. Touch desired valve.
The option is set with the setting "Select A valve during start" (see Chapter
8.5.8 CIRCULATION (OPTION)
If necessary, the A, B or C components not in use have to be circulated.
