8
VERSION 01/2018
ORDER NUMBER DOC 394821
2
CORRECT USE
2.1
DEVICE TYPE
Manual gun for manually coating work pieces.
GM 4100 AC
2.2
TYPE OF USE
The automatic spray gun is suitable for atomizing liquid products, particularly coating
products, using the AirCoat process.
– Non-ignitable products.
– Products in accordance with their classification in explosion class IIB.
WAGNER explicitly prohibits any other use!
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WAGNER.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
2.3
FOR USE IN POTENTIALLY EXPLOSIVE AREAS
The device is suitable for use in potentially explosive areas as defined in Directive
2014/34/EU (ATEX), (see Explosion protection marking Chapter
2.4
PROCESSIBLE WORKING MATERIALS
Top-coat lacquers, primer paints, corrosion protection, textured lacquers, lyes, staining
solvents, clear lacquers, separating agents, etc. with a solvent or water base. If you want to
spray working materials other than the aforementioned, contact a WAGNER representative.
Note:
Contact your local WAGNER dealer and the lacquer manufacturer if you encounter
application problems.
2.5
MISUSE
Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
no dry coating products, e.g. powder are processed;
no food, medicine or cosmetics are processed.
It is important to note that the device's materials are not food-safe.
Summary of Contents for AirCoat GM 4100 AC
