background image

9

VERSION 03/2018

ORDER NUMBER DOC  2369735

1.5 

TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL

GA 5000EAW

GA 5000EAWIC or GA 5000EAWEC

Cleaning

Manual cleaning of devices and device parts with cleaning agent.

Flushing

Internal flushing of paint-wetted parts with flushing agent.

Staff qualifications

Trained person

Is instructed in the tasks assigned to him/her, the potential risks 

associated with improper behavior as well as the necessary 

protective devices and measures.

Electrically trained 

person

Is instructed by an electrician about the tasks assigned to him/her, 

the potential risks associated with improper behavior as well as 

the necessary protective devices and measures.

Electrician

Can assess the work assigned to him/her and detect possible 

hazards based on his/her technical training, knowledge and 

experience in relevant provisions.

Skilled person in the 

context of DGUV 209-052

A person who, based on his/her technical training, experience and 

recent vocational experience, has sufficient technical knowledge 

in the area of electrostatic coating and is familiar with the relevant 

and generally accepted rules of technology so that he/she can 

inspect and assess the status of devices and coating systems 

based on workplace safety.

 Additional requirements for skilled persons can also be found 

in TRBS  1203  (2010/amendment 2012): Expert knowledge in 

the areas of protection against excessive pressure, electrical 

hazards, and explosion protection (where applicable).

Summary of Contents for AquaCoat 5010 GA 5000EAW













































































































































Reviews: