54
AquaCoat GM 5000EACW
AquaCoat
100
80
60
40
20
μA
80
60
40
20
10
kV
R3
R2
R1
POWER
0
1
POWER
B_03377
5
6
AquaCoat
100
80
60
40
20
μA
80
60
40
20
10
kV
R3
R2
R1
POWER
0
1
POWER
B_03378
22
2
27
OPERATING MANUAL
EDITION 04/2012
PART NO. DOC2321362
5.4.13
SETTING THE CURRENT LIMITING
Works procedure:
1. Press the „Current limiting“ button (5)
to adjust the limitation of the spray
current. The LED (6) indicates that
current limiting is selected.
2. The current limiting can now be
adjusted using the universal rotary
controller (2) between 10 - 100 µA with
a resolution of 1 µA. The value is shown
in the LED display (27).
Above the „current limiting“ button (5) is the „Current limiting“ bar graph display (22). When
the control unit is in the ready position, this display shows the set point as a dot.
The current limiting is an adjustable threshold. If this threshold is exceeded, for example by
approach of the spray gun to the spraying object, the high-voltage is adjusted downwards
until the threshold is no longer exceeded.
The values set in the examples for target high voltage at 40 kV and current limiter at 83 µA
are stored in R2 through prolonged pressing of the recipe pushbutton (> 2 sec.).
Summary of Contents for AquaCoat AirCoat GM 5000EACW
