22
Basic 8000
.
OPERATING MANUAL
VERSION 12/2010
ORDER NUMBER DOC 3305595
7
CLEANING AND MAINTENANCE
Description
Check
Remark
Compressed air quality
at intervals
The compressed air
connection at the control
cabinet must be free of
water, oil and dirt
(also refer to chapter 4.2).
7.1
SETTING THE CLEANING INTERVALS
There is a LOGO-control unit in the control cabinet of the Basic 8000 which controls the
cleaning intervals.
The basic functions are described on the following page.
You will fi nd an exact description of this controller in a separate settings manual
(article number: 3305994).
Normally, there is no need to make any settings at the LOGO controller and such work
should only be done by qualifi ed personnel.
SIHI_05016_ENG
DANGER
Incorrect maintenance/repair!
Danger to life and equipment damage.
Maintenance and repair work may only be carried out by trained
personnel or by the Wagner Service Team.
Switch the system off before starting work and secure it against
being accidentally turned back on by anyone else (lock the
main switch at the controller).
Insure the proper grounding of all system components.
Summary of Contents for Basic 8000
Page 1: ...Spray wall Basic 8000 Version 12 2010 Translation of the original Operating manual ...
Page 2: ......
Page 35: ......