32
Control 150 M
GB
Preparing the sprayer for longterm storage
1) Make sure you have already completed the
Cleanup
steps on pages 29-30.
2) Remove the inlet filter. You may need to use a screwdriver
to pry it loose.
Inlet
filter
3) Pour approximately 60 ml of light household oil into
the inlet valve.
HOUSEHOLD
OIL
4) Remove hose from outlet valve, place a rag over the
outlet valve, and turn the switch ON. Let the unit run
for five seconds.
l
5) Switch the pump OFF.
O
6) Reinstall the inlet filter and press the button on the filter.
Button
7) Wipe the entire unit, hose and gun with a damp cloth to
remove accumulated paint.
8) Replace the high pressure hose to the outlet valve and
replace the hopper lid.
STORAGE
Storage/Conservation of the gun
1) Unclip the trigger guard from the filter housing by
pulling outward from the filter housing.
2) Unscrew the housing.
3) Turn the gun over and fill with a few drops of oil.
HOUSEHOLD
OIL
4) Reassemble the gun.
