27
Control Pro 250 R / 350 R
GB
Accessories (not included in the delivery)
Description
Order No.
Nozzle 619 (for thick materials, e.g. interior wall paints. For coating larger surfaces)
0517619
Gun extension (30 cm)
0517700
Oil (118 ml)
2319722
Further information about the WAGNER range of products for renovating is available under www.wagner-group.com
Technical Data
Control Pro 250 R
Control Pro 350 R
Pump type
Piston pump
Power source
230 V
~
50 Hz/ 240 V
~
50 Hz
Power consumption
550 W
600 W
Fusing
Only connect to sockets protected with an FI fuse (16 A)
Protection class
I
Max. spray pressure
11 MPa (110 bar)
Max. delivery rate
1.25 l/min
1.5 l/min
Sound pressure level
*
83 dB (A) Uncertainty K= 3 db
83 dB (A) Uncertainty K= 3 db
Sound pressure output
*
95 dB (A) Uncertainty K= 3 db
97 dB (A) Uncertainty K= 3 db
Oscillation level *
< 2.5 m/s
2
Uncertainty K= 1.5 m/s
2
Max. temperature of coating substance
40°C
Hose length
9 m
15 m
Max. hose length
30 m
Product dimensions
approx. 47.5 x 29.5 x 36 cm
Weight
approx. 7.1 kg
approx. 7.7 kg
* Measured in accordance with EN 50580:2014
Information about the oscillation level
The specified oscillation level has been measured according to a standard test procedure and can be used to compare against electric tools.
The oscillation level is also for determining an initial assessment of the vibrational strain.
Attention!
The vibration emission value can differ from the specified value when the electric tool is actually in use, depending on
how the electric tool is being used. It is necessary to specify safety measures to protect the operating personnel. These measures are
based on an estimated shutdown during the actual conditions of use (all parts of the operating cycle are taken into consideration
here, for example periods when the electric tool is switched off, and, when it is switched on but running without any load).
Environmental protection
The device and all accessories and packaging have to be re-used in an environmentally friendly manner. Do
not dispose of the appliance with household waste. Support environmental protection by taking the appliance
to a local collection point or obtain information from a specialist retailer.
Leftover paint and solvents may not be emptied into drains, the sewage system or disposed of as household rubbish. It has
to be disposed of separately as special waste. Please pay special attention to the instructions on the product packaging.
Important Note regarding Product Liability!
Due to an EC ordinance in effect since 01.01.1990, the manufacturer is liable for his product only if all parts originate from or were
approved by the manufacturer and the devices are assembled and operated correctly. The use of other accessories and spare parts
can partially or completely invalidate the liability.
Summary of Contents for CONTROL PRO 250 R
