10
ENGLISH
CLEANUP
i
When cleaning, use the appropriate cleaning solution (warm, soapy water for latex materials;
mineral spirits for oil-based materials).
FLUSHING THE SPRAY GUN / CONTAINER
Aenon
Never clean air cap or air holes in the nozzle
with sharp metal objects. Do not use solvents or
lubricants containing silicone.
Special cleanup instructions for use with
flammable solvents (must have a flashpoint above
100˚F (38˚C):
•
Always flush spray gun outside.
•
Area must be free of flammable vapors.
•
Cleaning area must be well-ventilated.
•
Do not submerge turbine!
1.
Turn turbine OFF.
2.
Remove the container and empty any remaining material.
3.
Thoroughly rinse the material container with warm, soapy
water (or mineral spirits for oil-based materials).
4.
Fill the material container halfway with cleaning solution
and spray cleaning solution through the gun into a waste
container.
Aenon
If you cleaned the sprayer using mineral spirits,
repeat steps 1-4 using warm, soapy water.
Move on to “Cleanup - Cleaning the Spray Gun”, page 11 for
more thorough cleaning.
1
O = OFF
2
3
4
EMPTY WASTE
CONTAINER
