4
ENGLISH
CONTROLS AND FUNCTIONS
Turbine
Air hose
Spray gun
Air cap
Locking lever
Turbine handle
Fluid p removal wrench
Fluid nozzle
Needle
Spray direcon
plate
Air cap
Air cap
ring
Pickup tube
ON/OFF switch
Filter housing
Viscosity cup
Material flow control
Trigger
Material container
Air hose adapter
FLUID TIPS AND NEEDLES
Paints, varnishes, wood finishes, etc, are manufactured using a variety of materials and have widely different viscosities. You may find
that the 1.5mm fluid tip and needle supplied with this spray gun does not enable you to spray your particular choice of finish exactly
as you would like.
In such cases a change of fluid tip and needle size will probably solve this problem. In general, thicker, more viscose materials are best
sprayed through a larger fluid tip to give best coverage. Thinner, less viscose materials are best sprayed through a smaller fluid tip. To
allow for these variations fluid tip and needle sets are available as optional extras in 1.0mm, 2.0mm and 2.5mm (See page 13).
See page 12 for instructions on how to change the needle and nozzle set.
