5
ENGLISH
CONTROLS AND FUNCTIONS
ON/OFF SWITCH
The ON/OFF switch turns power to the turbine on
and off. The ON/OFF switch is located on top of the
carrying handle of the turbine.
MATERIAL FLOW CONTROL
The material flow control determines the amount of spray
material that is sprayed from the spray nozzle.
Set the material flow by turning the knob on the rear of
the spray gun.
TRIGGER
Pulling the trigger will deliver spray material from the
material container to the nozzle assembly, where it is
sprayed.
=
AIR CAP
Adjust the spray pattern by turning the air cap ears. Adjust
the air cap to your intended movement direction of the
spray gun.
=
=
=
Horizontal pattern (use ‘up and down’ spraying motion)
=
=
=
Vertical pattern (use ‘side to side’ spraying motion)
=
=
Round pattern (use ‘side to side’ or ‘up and down’
spraying motion)
