Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
7 Operation
Order number 2354913 | Edition 10/2022
33
U/I characteristic curve
[standard, medium,
soft]
The EPG-SPRINT XE control unit has 50 pre-defined recipes. 4 of these can be selected
directly using buttons 5-8 and the remaining 46 by pressing the [Additional recipes] button
(25) above the control dial (24). All recipes can be adapted and stored by the user to suit
individual requirements.
2x
2x
P_01746
5
6
7
8
25
5
Recipe 1 for [Surface parts]: High powder quantity, high powder charging
6
Recipe 2 for [Second coating]: Small powder quantity, low powder charging
7
Recipe 3 for [Profile parts]: Medium powder quantity, low powder charging
8
Recipe 4 for [Double-click function]: Individual setting, activated by a double click on
the manual gun or once this button has been pressed
25 Recipe nos. 5 to 50: Can be selected with the control dial (24) after pressing the but-
ton
7.3.1 Double-click recipe (High Dynamic Remote)
This function is used to change quickly to another recipe during a coating operation. The
operator can call up a previously set recipe by double-clicking on the trigger lever on the
spray gun, for example to recoat parts using different parameters (high voltage, current
limitation, air volumes etc.).
To call up the function, press the trigger lever on the spray gun twice in quick succession and
hold down. Upon releasing the trigger, the original recipe will be returned to.
