background image

Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
15   Declaration of Conformity

Order number 2354913 | Edition 10/2022

67

15   DECLARATION OF CONFORMITY

15.1   EU DECLARATION OF CONFORMITY FOR CONTROLLER

Herewith we declare that the supplied version of:

EPG-SPRINT X / EPG-SPRINT XE

complies with the following guidelines:

2014/34/EC (ATEX Directive)

2014/30/EC (EMC Directive)

2011/65/EC (RoHS Directive)

Applied standards, in particular:

EN ISO 12100: 2010

EN 60079-31:2014

EN 60204-1:2018

EN 1127-1:2019

EN 60529:1992+A2:2013

EN IEC 61000-6-2:2019

EN 50050-2:2013

EN IEC 61000-6-4:2019

EN 50177:2009+A1:2012

EN IEC 63000:2018

EN IEC 60079-0:2018

Applied national technical standards and specifications, in particular:

DGUV-I 209-052

Identification:

0102

 

 II 3(2) D IP64 80°C

Declaration of Conformity

The declaration of conformity is enclosed with this product. If needed, further copies can be
ordered through your WAGNER dealer by specifying the product name and serial number.

Order number:

 2327595

15.2   FM CONTROL DOCUMENT

Identification:

FM Control Document

The FM Control Document is enclosed with this product. If needed, further copies can be
ordered through your WAGNER dealer by specifying the product name and serial number.

Order number:

 2309729

Summary of Contents for EPG-SPRINT XE

















































































Reviews: